PRODUCTION ENHANCEMENT PROJECTION SERVICE

FEE FOR MxL PRODUCTION ENHANCEMENT PROJECTION SERVICE

P.E.P.S. software analyses to determine temperature profiles at selectable periods for expected power and production will be generated. Madis will use that information and results from past installations to generate pressure profiles based on the viscosity reduction as indicated by the temperature profile and further modified by the pressure profile. The pressure profile is then matched to reservoir conditions to project a production rate.

There is no attempt to correct for bubble point transition or flashing of light ends as the method of operation with the MxL system has been to raise the temperature slowly in order to observe when such factors affect production and to adjust temperature settings to remain below such transition points.

Madis will provide the temperature and pressure graphs generated, as outlined above, via email in PDF format. Where background information, from previous installations is limited, we will base the projections on the available data and provide a qualified projection with the basis of the projection described. There is considerable variation from well to well which precludes Madis from guaranteeing the projections.

Madis xL Ltd. offers the first candidate analysis for free. Additional analyses are $250 US each which shall be invoiced with the emailed documents. Five candidates submitted at the same time will be processed for $1000 US. Should the analyses result in the purchase of a MxL system for an analyzed candidate, 50% of the amount spent reviewing candidates will be credited towards purchase of the system.

TERMS OF SERVICE

MADIS xL Ltd., (formerly Madis Engineering Ltd.), “MADIS” provides its service to you, subject to the following Terms Of Service “TOS”, which may be updated by us from time to time without notice. Unless explicitly stated otherwise, any new features that augment or enhance the current service shall be subject to the TOS.

Madis xL Ltd. does not share or distribute information entered on this form.
Form data is transmitted via email to Madis xL Ltd.

You understand and agree that this service is provided “AS-IS” and that MADIS assumes no responsibility for the timeliness, deletion, mis-delivery or failure to store any user communications. You expressly understand and agree that MADIS shall not be liable for any damages, including but not limited to, damages for loss of profits, goodwill, use, data or other intangible losses. This site may provide links to other World Wide Web sites or resources. Because MADIS has no control over such sites and resources, you acknowledge and agree that MADIS is not responsible for the availability or any content of such external sites or resources. MADIS will not share your email or contact information without prior consent. Any reference to specific individual or corporate entities does not constitute an endorsement, recommendation or favor by MADIS.

Madis xL Ltd. recommends using non-identifying reference numbers in the Well Identification field if security is a concern.

    Contact Person



    Company Information








    Input this code:
    captcha

    Well Profile

    Select your Unit Preferences: MetricImperial


    millidarcies
    percent


    Oil Characteristics

    Please enter Viscosity at various temperatures. (minimum 2 required)
    centipoise at degrees
    centipoise at degrees
    centipoise at degrees
    Reservoir Characteristics






    Copyright © 2014 by MADIS, MxL is a trademark of MADIS, VPS Software is a trademark of MADIS

    For more information on our P.E.P.S. service please use our web-form to Email Us or click: info@madisxl.com to send an email with your email client.